FAQs

Earthmoving machinery
Excavator: It is mainly used for digging soil, ore and other materials, and can carry out earthwork excavation, rock crushing and other operations. There are two types of tracked and wheeled, according to the needs of the work can be equipped with different buckets and accessories.
Loader: Used to load loose materials, such as sand, soil, etc. With high mobility and efficiency, it can be transported for short distances.
Bulldozer: used to bulldoze the ground, clean the site, pile up materials and other operations. It is usually equipped with large dozer shovels that can push large amounts of earth and rock.
Two, lifting machinery
Cranes: including truck cranes, crawler cranes, tower cranes, etc. Used for lifting heavy objects, widely used in construction, bridge construction and other fields.
Forklift: mainly used for handling and loading and unloading goods, can be used in warehouses, factories and other places. There are internal combustion forklifts and electric forklifts.
Third, road construction machinery
Roller: used for compacting the road surface to make the road surface more flat and solid. There are different types of single steel wheel roller, double steel wheel roller and rubber wheel roller.
Paver: Used for laying asphalt pavement or cement pavement, which can spread the mixture evenly on the road surface.
Fourth, concrete machinery
Concrete mixer truck: used to transport concrete and transport the mixed concrete from the mixing station to the construction site.
Concrete pump truck: Through the pumping system to transport concrete to high or distant construction sites, improve construction efficiency.
Five, mining machinery
Mining truck: used to transport ore, slag and other materials in the mine, with a large load, strong cross-country performance and other characteristics.
Rock drilling truck: Used to drill holes in mines to provide holes for blasting.

Other engineering vehicles
Aerial work truck: provides aerial work platform to facilitate workers to carry out aerial work, such as installation, maintenance and so on.
Sprinkler: Used for road watering, dust removal, washing and other operations to keep the road clean and environmental humidity.
Suction truck: used to clean sewage and dirt in sewers, septic tanks and other places.

The maintenance of the engineering vehicle is essential to ensure its performance, extend its service life and improve its work efficiency. The following are the main aspects of vehicle maintenance:
First, daily maintenance
clean
After each operation, clean the outside of the engineering vehicle in time to remove dust, dirt, oil, etc. This not only keeps the appearance of the vehicle clean, but also prevents dirt from corroding the body and components.
Clean engine compartment to prevent debris buildup affecting heat dissipation and engine performance.
Keep the driving environment comfortable by removing dust and trash from the cab.
Check liquid level
Check engine coolant level to ensure it is within normal range. Insufficient coolant can cause the engine to overheat and damage the engine.
Check the oil level, too little oil will increase engine wear, too much may lead to engine failure.
Check the hydraulic oil level. For hydraulic driven engineering vehicles, the normal liquid level of hydraulic oil is the key to ensure the normal operation of the system.
Check the fuel tank level, replenish fuel in time, and avoid shutdown due to fuel depletion during operation.
Check the tire
Check the tire pressure to ensure it complies with the vehicle manufacturer's regulations. Too high or too low air pressure will affect the service life of the tire and the driving performance of the vehicle.
Check the tire wear and see if the tire pattern depth reaches the wear limit. If the tire is seriously worn, it should be replaced in time.
Check whether there is damage to the tire, such as cuts, bulges, etc., and deal with the problem in time.
Check fasteners
Regularly check the fasteners of various parts of the engineering vehicle, such as bolts, nuts, etc., to ensure that they are fastened reliably. Loose fasteners can cause parts to fall off or be damaged, affecting the safety and performance of the vehicle.
Second, regular maintenance
Change the oil and filter
Change the engine oil and filter regularly according to the vehicle manufacturer's regulations. Oil plays a role in the engine lubrication, cooling, cleaning, etc., with the extension of the use of time, the oil will deteriorate, the filter will also be blocked, affecting the engine performance.
For the hydraulic system, the hydraulic oil and filter should also be replaced regularly to ensure the normal operation of the hydraulic system.
Check and adjust the braking system
Check the wear of the brake disc and brake disc, and replace it in time when the wear reaches the limit.
Check brake fluid level to ensure it is within normal range. If the brake fluid is insufficient, it should be added in time.
Adjust the free travel of the brake pedal to ensure the sensitivity and reliability of the brake system.
Check and adjust the transmission system
Check the connection of the transmission shaft, universal joint and other components to ensure that they are tight and reliable.
Check the transmission oil level and change the transmission oil regularly.
For the tracked engineering vehicle, check the tension of the track and adjust it to the appropriate degree.
Check electrical system
Check the battery power and charging status to ensure that the battery is working properly. If the battery is low, charge or replace the battery in time.
Check the connection of wires, plugs, relays and other electrical components to ensure that they are in good contact without loosening, corrosion and other phenomena.
Check that lights, horns and other electrical equipment are working properly.
Three, special maintenance
Seasonal maintenance
In winter, you should do a good job of cold and warm work, replace the oil and coolant suitable for low temperature environment. For engineering vehicles parked in the open air, measures such as covering insulation materials can be taken to prevent the vehicle from freezing damage.
In the summer, attention should be paid to prevent the engine from overheating, check the working condition of the heat dissipation system, clean the radiator, and ensure good ventilation. At the same time, pay attention to prevent tires from overheating and avoid driving for a long time in a high temperature environment.
Long-term parking maintenance
If the engineering vehicle needs to be parked for a long time, the vehicle should be parked in a dry and ventilated place to avoid direct sunlight and rain.
Remove the battery, store it in a dry, cool place, and charge it regularly to prevent battery damage.
To seal the engine, anti-rust agent can be added inside the engine to prevent the engine from rusting.
Support the tire to avoid long-term compression and deformation of the tire.
In short, the maintenance of the engineering vehicle needs to be carried out in strict accordance with the regulations of the vehicle manufacturer, and the various systems and components are regularly checked and maintained to ensure that the vehicle is always in good working condition. At the same time, the operator should also have certain maintenance knowledge and skills, and pay attention to the correct operation and maintenance of the vehicle in daily use.

Quality is our top priority! Our factory utilizes advanced production technology and is managed by a dedicated team. We uphold strict quality control measures right from the start of production.

We work on T/T term, L/C term.

(1). On T/T term: 30% deposit in advance and 70% balance shall be settled before shipment or against the copy of original B/L for regular clients.

(2). On L/C term: 100% irrevocable L/C without”soft clauses” from an international recognized bank can be accept.

Our standard delivery time is within 15 working days(if in stocks) upon receipt of your advance payment.

We can ship machinery by various transportation.

(1) For 80% of our shipment, the machine will go by sea to all main continents such as Africa.South America, Middle East. Oceania and Southeast Asia etc. either by container or RORO / Bulk shipment.

(2) For inland neighborhood countries of China, such as Russia, Mongolia, Kazakhstan, Kyrgyzstan, Tajikistan, Uzbekistan, Turkmenistan etc. we can send machines: by road or railway.

(3) For light spare parts in urgent demand, we can send it by international courier service, such as DHL, TNT, UPS or FeDex.

One, Construction Industry
Housing Construction: In the process of housing construction, engineering vehicles play a crucial role. For example, concrete mixer trucks provide concrete on construction sites to ensure the smooth progress of construction. Cranes can lift heavy construction materials such as steel bars and steel beams to designated locations, improving construction efficiency. Dump trucks are used for transporting earth and stone, which is convenient and efficient. Loading and unloading machines can perform earth excavation and leveling operations, creating conditions for the construction of building foundations.
Road and Bridge Construction: In road and bridge construction, engineering vehicles are indispensable. Rollers are used to compact the road surface to ensure flatness and density. Paver machines evenly spread road surface materials such as asphalt on the road, improving road quality. Bulldozers can level the ground and remove obstacles, preparing the road for construction. Graders are used to level the road surface, making it smoother.
Two, Mining Industry
Open-pit Mining: In open-pit mining, large mining dump trucks are the main transportation tools, capable of transporting large quantities of ore from the mining site to processing plants or storage areas. Excavators are used for mining ore and earth, with their powerful digging ability enabling them to complete digging tasks quickly and efficiently. Loaders can load ore onto mining dump trucks, improving loading efficiency. Drilling machines are used to drill holes on the surface of the mine, preparing for blasting operations.
Underground Mining: In underground mining, various engineering vehicles are also needed. For example, scraper machines can load and transport ore in narrow underground passages. Mine hoists are used to raise ore and personnel from underground to the surface, ensuring safe mining operations. Fans provide fresh air for underground mines, ensuring the safety of miners.
Three, Transportation Industry
Port Logistics: Ports are important hubs of international trade, and engineering vehicles play an important role in port logistics. Container crane machines can quickly and efficiently load and unload containers, improving port operation efficiency. Forklifts are used to move various goods, which is convenient and quick. Tractor trucks can pull containers to designated locations, Construction vehicles are used in various industries, including construction, mining, transportation, agriculture, environmental protection, and municipal engineering. They are essential tools for improving efficiency and safety in these industries.

In the construction industry, construction vehicles are used for various purposes, such as transporting materials, excavating soil, and paving roads. In the mining industry, mining vehicles are used for transporting minerals and personnel, as well as for excavating and transporting materials.

In the transportation industry, trucks are used for transporting goods and passengers, while in the agriculture industry, tractors and harvesters are used for farming and harvesting crops.

In the environmental protection industry, vehicles such as garbage trucks and waste compactors are used for collecting and disposing of waste, while in the municipal engineering industry, vehicles such as street sweepers and sewer cleaners are used for maintaining the cleanliness and functionality of urban areas.

In summary, construction vehicles are widely used in various industries and play an important role in supporting and ensuring the development of these industries.